Difference between revisions of "CNC Bender v12.7"

From ATTWiki
Jump to: navigation, search
(Created page with "<table> <tr> <td width=400> ===v12.4 - January 20, 2014=== *Back to CNC Bender Software Updates *See [http://advancedtubular.com/customers/cncbender CNC Bender Customer Se...")

Revision as of 04:01, 21 January 2014

v12.4 - January 20, 2014

Cncv12procontrol withteachmode.jpg


Check.jpg ENHANCED: Loading with Bend Arm Motion

CNC Bender PreBend has a new option called "Arm to Home Mode" that controls when the bend arm returns home before bending begins. The goal is optimization of the cycle.

These are the choices:

1: Before Move to Load

2: During Move to Load

3: After Move to Load

4: After Chuck Close

5: During Move to Start

6: After Move to Start

Use this in conjunction with the PostBend Release command where you can turn off the bend arm return during release.

Cncbender ArmToHomeInPrebend.png



Check.jpg ENHANCED: Extended Timing Control for Servo Modules



Momentum.jpg



Check.jpg Other Changes

  • The HAND BENDER MODE of CNC Bender is enhanced to allow for Bending without the Feed axis following. This is helpful for applications where the last bend will pull the chuck into the pressure die or inside wiper die.



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=CNC_Bender_v12.7&oldid=23603"