Difference between revisions of "CNC Bender v14.9-r9"

From ATTWiki
Jump to: navigation, search
(Created page with "<table> <tr> <td width=400> ===v14.9-r9 - January 22, 2015=== *Back to CNC Bender Software Updates *See [http://advancedtubular.com/customers/cncbender CNC Bender Customer...")
 
(→‎25px SIGNIFICANT ENHANCEMENT: Teach Mode)
Line 23: Line 23:
 
* The finish-up rotation calculations now take into account the avoidance route programmed in the Rotation options (short, long, CW, or CCW).
 
* The finish-up rotation calculations now take into account the avoidance route programmed in the Rotation options (short, long, CW, or CCW).
 
* A serious memory issue was resolved.  This issue could cause application error dialogs to display.
 
* A serious memory issue was resolved.  This issue could cause application error dialogs to display.
−
* Steps were taken to make handling Custom Commands in the process list much faster than before.  There is significantly less pause time between Custom Command steps in the process.
+
* Steps were taken to make handling Custom Commands in the process list much faster than before.  There is significantly less pause time between Custom Command steps in the process.<br><br>
 +
* Combined servo and non-servo motion in one Custom Command used to cause the command to pause the process if the non-servo was added first.  This has been fixed.  Any combination of motions in any order now works.
 
<br><br><br><br>
 
<br><br><br><br>
 +
 +
 +
==[[image:Check.jpg|25px]] ENHANCEMENT: COMDEF Editor ==
 +
 +
Custom Commands can now be loaded into the COMDEF editor to see what Processlist Builder put in them.<br><br><br><br>
  
 
==Other Pages==
 
==Other Pages==

Revision as of 17:47, 23 January 2016

v14.9-r9 - January 22, 2015

Cncbender v14 logo.png


Check.jpg SIGNIFICANT ENHANCEMENT: Teach Mode

Teach mode is significantly enhanced:

  • The interface was changed to make teach mode more usable.
  • CNC Bender now warns about motion commands that were added but not actually moved during teach mode.
  • The finish-up rotation calculations now take into account the avoidance route programmed in the Rotation options (short, long, CW, or CCW).
  • A serious memory issue was resolved. This issue could cause application error dialogs to display.
  • Steps were taken to make handling Custom Commands in the process list much faster than before. There is significantly less pause time between Custom Command steps in the process.

  • Combined servo and non-servo motion in one Custom Command used to cause the command to pause the process if the non-servo was added first. This has been fixed. Any combination of motions in any order now works.






Check.jpg ENHANCEMENT: COMDEF Editor

Custom Commands can now be loaded into the COMDEF editor to see what Processlist Builder put in them.



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=CNC_Bender_v14.9-r9&oldid=28834"