Difference between revisions of "VTube-STEP and VTube-LASER Project File Compatibility"
(→All VTube License Levels Have 100% Compatible Project Files) |
(→All VTube License Levels Have 100% Compatible Project Files) |
||
| Line 24: | Line 24: | ||
<td width=300> | <td width=300> | ||
VTube-STEP and VTube-LASER save project files that are 100% compatible with each other.<br><br> | VTube-STEP and VTube-LASER save project files that are 100% compatible with each other.<br><br> | ||
| − | For example, anyone who runs VTube-STEP can setup and | + | For example, anyone who runs VTube-STEP can setup and save a VTube Project file (.vtp) that can be loaded in VTube-STEP or '''even VTube-LASER''' at other locations.<br><br> |
Customers use this capability to enter data in locations that are not near the arm, then save the project files to a network location. When FARO operator needs to measure the part as defined in the VTP file, then he/she loads the part from the network location into VTube-LASER. | Customers use this capability to enter data in locations that are not near the arm, then save the project files to a network location. When FARO operator needs to measure the part as defined in the VTP file, then he/she loads the part from the network location into VTube-LASER. | ||
</td> | </td> | ||
Revision as of 17:23, 24 February 2016
|
|
|
All VTube License Levels Have 100% Compatible Project Files
|
VTube-STEP and VTube-LASER save project files that are 100% compatible with each other. |
|
About VTube-LASER Programmer
|
You can setup a VTube-LASER project in VTube-STEP. However, some customers also want to control the LASER setup variables that are not available in STEP mode. So they purchase VTube-LASER Programmer to do this away from the FARO arm. |
|
Other Pages
- Back to the VTube-STEP page
- Back to the VTube-LASER page
