Difference between revisions of "VTube-STEP v2.5"

From ATTWiki
Jump to: navigation, search
(→‎25px NEW: Project File Save Notification Proves the Project Was Saved)
(→‎25px NEW: HOT Keys Control-L (Load) and Control-S (Save) for VTube Project Files)
Line 44: Line 44:
 
<td width=300>
 
<td width=300>
 
[[image:VTube_Ctrl-S_Ctrl-L.png|600px]]<br><br>
 
[[image:VTube_Ctrl-S_Ctrl-L.png|600px]]<br><br>
 +
</td>
 +
</tr>
 +
</table>
 +
<br><br>
 +
 +
==[[image:Check.jpg|25px]] NEW: CALCULATE TUBE ELONGATION PERCENTAGE FEATURE==
 +
<table cellpadding=10 width=800>
 +
<tr valign=top>
 +
<td width=300>
 +
Now VTube-LASER can calculate Tube Elongation Percentage by subtracting the current CUT LENGTH from the MEASURED LENGTH - then calculate the percentage by comparing that change to the total ARC LENGTHS in the measured tube.<br><br>The formula used is '''(Measured Length - Cut Length) / (Arc Length Sum for Whole Tube) X 100'''
 +
</td>
 +
<td width=300>
 +
[[image:vtube-laser_v2.5_recalc_TubeElongation.png|400px]]<br><br>
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 11:12, 18 April 2016

Vtube-step logo 2.png

Revision 2.5

Vtube-step-1.87 screenimage.png

Contents




Check.jpg NEW: Project File Save Notification Proves the Project Was Saved

Vtube v2.5 savedfilewindow alone.png

Previous versions of VTube were quiet when you saved a project file. That made some of our customers understandably nervous.

So now VTube always shows a quick notification at the top of the screen when you save a project file.

The window displays for a few seconds then disappears automatically. But you can even keep working when this window is open because you can click on other parts of VTube even while this notification is on the screen.

Vtube v2.5 savedfilewindow.png



Check.jpg NEW: HOT Keys Control-L (Load) and Control-S (Save) for VTube Project Files

These new hotkeys are a simple thing- but they'll make your life much easier if you're a hotkey user.

Try it. Press CTRL-L to load a project file, then CTRL-S to quickly save it again. It's about as easy as it gets.

(The new project save notification window described above will display every time you press CTRL-S.)

VTube Ctrl-S Ctrl-L.png



Check.jpg NEW: CALCULATE TUBE ELONGATION PERCENTAGE FEATURE

Now VTube-LASER can calculate Tube Elongation Percentage by subtracting the current CUT LENGTH from the MEASURED LENGTH - then calculate the percentage by comparing that change to the total ARC LENGTHS in the measured tube.

The formula used is (Measured Length - Cut Length) / (Arc Length Sum for Whole Tube) X 100

Vtube-laser v2.5 recalc TubeElongation.png



Other

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-STEP_v2.5&oldid=29684"