Difference between revisions of "VTube NUMALLIANCE Bender Correction"

From ATTWiki
Jump to: navigation, search
(→‎STEP 4)
(→‎STEP 4)
Line 111: Line 111:
  
 
<td>
 
<td>
−
[[image:NumallianceCorrectionSlide4.png|800px]]
+
[[image:NumallianceCorrectionSlide5.png|800px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 15:22, 15 July 2019

VTube-LASER AssemblyOverModel.png RightOrangeArrow.png Numalliance Splash.png

This page describes how to use VTube-LASER to correct NUMALLIANCE benders.

Back to VTube-LASER

Contents


NUMALLIANCE CORRECTIONS

VTube-LASER has an export option for NUMALLIANCE CSV files that is used to correct the NUMALLIANCE benders.

Note: NUMALLIANCE benders only require the measured data for corrections.

Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

NumallianceCorrectionsSlide1.png




STEP 1

These steps assume that you have measured the tube and have measured tube data to send to the NUMALLIANCE. Click on the "Measured Tube" button in the navigation pane.

NumallianceCorrectionSlid2.png




STEP 2

Choose the EXPORT tab menu.

NumallianceCorrectionSlide3.png




STEP 3

Choose the NUMALLIANCE CSV File option in the pulldown list.

NumallianceCorrectionSlide4.png




STEP 4

click the Export button.

It is very important to enable the Positive Rotation options for most NUMALLIANCE benders. They normally rotate positive Clockwise when standing from the front of the bender.

NumallianceCorrectionSlide5.png



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube_NUMALLIANCE_Bender_Correction&oldid=40129"