Difference between revisions of "CNC Bender v10-20070928"
From ATTWiki
(→NEW FEATURE: Automatic Torque Limit When Outside of Range) |
(→NEW FEATURE: Automatic FEED Torque Limit When Outside of Range) |
||
| Line 8: | Line 8: | ||
=NEW FEATURE: Automatic FEED Torque Limit When Outside of Range= | =NEW FEATURE: Automatic FEED Torque Limit When Outside of Range= | ||
| − | |||
| − | |||
<ul> | <ul> | ||
Revision as of 03:18, 28 September 2007
Contents |
NEW FEATURE: Automatic FEED Torque Limit When Outside of Range
-
Now CNC Bender software uses the FEED torque limiting values programmed into the Low Level menu to ensure that any torque levels outside the range are moved into the valid range. This will protect the carriage against very low or high torque values in the CNC Bender Process List.
During a Regular Shutdown
- The operator requests shutdown of software.
- CNC Bender hides the interface.
- CNC Bender displays a shutdown message on the screen showing a progress bar.
- After the progress bar is filled, CNC Bender saves its configuration data.
During an Immediate Power Loss Shutdown
- A loss of power to the operator station occurs.
- CNC Bender is not given time to perform a normal shutdown because the delay progress will not be filled.
- CNC Bender will shutdown before it attempts to save a partial file and potentially corrupts the configuration data.
</ul>
How to UPGRADE
If your operator station contains one of the versions listed below, then they can be upgraded through simple self-installation:
Please contact Advanced Tubular Technologies for upgrade information.
