Difference between revisions of "Chiyoda Communications with VTube"

From ATTWiki
Jump to: navigation, search
(→‎STEP 3)
(→‎STEP 1)
Line 26: Line 26:
 
Create a template in the Chiyoda with the number of bends the new part will have. </td>
 
Create a template in the Chiyoda with the number of bends the new part will have. </td>
 
<td>
 
<td>
−
[[image:Vtube-STEP_v3.2_toolbar_sys.png|600px]]
 
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 17:03, 2 June 2022

Vtube-step logo 1.96.png

VTS2 SplashScreen1.png


Which files are used to create parts in the Chiyoda?

The files used are .CHS files.

Steps to send files between the Chyioda and VTube-STEP

STEP 1

Create a template in the Chiyoda with the number of bends the new part will have.

STEP 2

Save the template created on the Chiyoda onto a thumb drive.

Vtube-v3.2 backupexportconfiguration.png

STEP 3

Load in the desired part into VTube-STEP (must match the bend count on the template created in the bender)

Vtube v3.2 CHSpart.png

STEP 4

In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS

Vtube v3.2 CHS.png


Steps to RESTORE a Configuration from a Backup

STEP 1

Press the System Options button.

Vtube-STEP v3.2 toolbar1 sys.png

STEP 2

Press the RESTORE and Reset VTube Configuration from a VTube Zip Backup File.

Vtube-v3.2 importconfiguration.png

STEP 3

Find and open the backup file.

Vtube v3.2 importconfig openbackup.png

STEP 5

Press Continue in the warning dialog.

Vtube v2.2 importconfig clearoverwrite configuration warning.png

STEP 6

Press OK.

Vtube v3.2 importconfig configuration created.png


Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Chiyoda_Communications_with_VTube&oldid=42224"