Difference between revisions of "Importing a .STP File"

Revision as of 19:49, 16 February 2023

The files used are .stp files.

STEP 1 Make sure VTube-STEP is cleared.
STEP 2 Under Import/Export, import a STEP File-STP.
STEP 3 Load the desired part into VTube-STEP from the file it is saved in inside file explorer
STEP 4 To collect parametric data, an operator can either autobuild or manually collect features. For Autobuild For Manual Collection

STEP 5 Choose the template file from the thumb drive and load it into VTube.
STEP 6 Press the Export to Chiyoda EX Data File button and choose the thumb drive from a persistent path or press Continue with no Selection and find the thumb drive on the computer.
STEP 7 Save the .CHS file to the same thumb drive, remove it and take it back to the bender
STEP 8 Load the file in the bender and bend the part. Make sure to double check the data in VTube-STEP matches the data in the bender.

@@ Line 55: / Line 55: @@
 ===STEP 4===
-In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS
+To collect parametric data, an operator can either autobuild or manually collect features.
+For Autobuild
+For Manual Collection
 </td>
 <td>
@@ Line 68: / Line 73: @@
 <tr>
 <td width=300>
 ===STEP 5===
 Choose the template file from the thumb drive and load it into VTube.</td>