Difference between revisions of "Push Bending Profile Table"
From ATTWiki
(→Profile Values) |
(→Profile Values) |
||
| Line 32: | Line 32: | ||
|- | |- | ||
| Arm Angle | | Arm Angle | ||
| − | | This is the final angle of the arm during [[ | + | | This is the final angle of the arm during [[Push Bending]]. |
|- | |- | ||
| Arm vAdjust | | Arm vAdjust | ||
Revision as of 20:20, 25 April 2008
Contents |
About Push Bending Profile Tables
This is a sample Push Bend Profile Table. Each profile row contains a profile setup for a given radius. An unlimited number of profile values can be entered. Using this method of calculation, it is possible to calculate different Push Bends by indicating the new bend angles.
Because we use this method of calculation, it is possible to correct push bent parts using measuring center connections. Correct the bend value, and the push bend values are automatically calculated during AutoBuild.
Loading the Profile Table Menu
The button is labeled "PB Profile" which stands for "Push Bending Profile."
Profile Values
| Value Name | Description | ||
|---|---|---|---|
| Profile Name | The "Profile Name" is what you use to identify a profile in the rest of CNC Bender. | ||
| Arm Angle | This is the final angle of the arm during Push Bending. | ||
| Arm vAdjust | This allows the velocity of the bend arm to be adjusted by a percentage of the original calculated velocity. | ||
| Feed Position | This is how far the carriage must travel to achieve the "@ Degrees" value. | ||
| Feed Velocity | This is the velocity of the carriage during the bend. The velocity of the carriage is used to calculate a starting bend arm motion speed. | ||
| @ Degrees | This is the angle of the tube that is achieved by the "Feed Position" value above. | ||
| |||
Other Pages
See CNC Bender v11-20080424 for information on the first version to enable Push Bending
