Difference between revisions of "Benderlink for Pines"

From ATTWiki
Jump to: navigation, search
(TS-2000 Control to Vector 1 Laservision)
Line 9: Line 9:
  
 
=TS-2000 Control to Vector 1 Laservision=
 
=TS-2000 Control to Vector 1 Laservision=
[[image:Ts-2000.jpg|100px|left]]
+
 
[[Image:EL Laservision Tube Data Center.jpg|right]]
+
 
The software installs directly on the operator station of the Pines TS-2000 controls.  It is designed to interact directly with the control.  The designer of the TS-2000 included a "Laservision" button that loads and calls to Benderlink for Pines.<br><br>
+
{| border="1" cellpadding="5" cellspacing="0" align="none" width=400
 +
|-
 +
| [[image:Ts-2000.jpg|100px]]
 +
| The software installs directly on the operator station of the Pines TS-2000 controls.  It is designed to interact directly with the control.  The designer of the TS-2000 included a "Laservision" button that loads and calls to Benderlink for Pines.
 +
| [[Image:EL Laservision Tube Data Center.jpg|300px]]
 +
|}
 +
 
 +
 
 +
 
 +
 
 +
T<br><br>
  
  

Revision as of 00:56, 1 May 2008

Blinkpines v2 mainscreen.jpg

Blink pines logo.jpg


Contents

About

Benderlink for Pines is software that connects PINES TS2000 controls with Eaton Leonard Vector Laservision measuring centers.


TS-2000 Control to Vector 1 Laservision

Ts-2000.jpg The software installs directly on the operator station of the Pines TS-2000 controls. It is designed to interact directly with the control. The designer of the TS-2000 included a "Laservision" button that loads and calls to Benderlink for Pines. EL Laservision Tube Data Center.jpg



T








Versions

Version 1.0

Version 1 of Benderlink for Pines communicated with Laservisions using the ATT protocol. The ATT protocol was a special protocol that required customers to purchase and install an upgrade to the Vector Laservision.

Blinkpines v1 mainscreen.jpg

Version 2.0

Version 2 is designed to communicate using the standard Eaton Leonard Velog, EL-2000, and Premier protocol. This protocol is available on every Eaton Leonard measuring center. No upgrade is necessary.

Blinkpines v2 mainscreen.jpg


LASERVISION.jpg
PINES bender.jpg