Difference between revisions of "Benderlink for KEINS"

Revision as of 17:59, 2 May 2008

This software is designed to communicate with Chiyoda and KEINS benders.

MAIN FEATURES

1 - It allows for intelligent bi-directional communications with measuring centers.

2 - It allows for offline programming.

3 - It allows customers to use a PC disk / network to store all Chiyoda / KEINS parts off the control. (Bypassing the floppy drive.)

LICENSE TYPES

There are two license types:

• FULL: The full Benderlink license is a site license that allows Benderlink to connect up to 100 benders at the same site.
  
  

• OFFLINE: The Benderlink offline license allows engineers to program Benderlink from a location that are off-site or at a remote location. The only difference between the OFFLINE license and the FULL license is that the OFFLINE version of the software will not communicate with benders. Typically offline license is used to save the data files to a shared network location. The full version of Benderlink for KEINS that is connected to the bender can load the files created and saved with the offline version of Benderlink.

REVISIONS