Difference between revisions of "Configuring Machine Lube Settings"
From ATTWiki
(→Configuration Section: "Machine Lube") |
(→Configuration Section: "Machine Lube") |
||
| Line 28: | Line 28: | ||
<tr> | <tr> | ||
<td>Machine Lube Duration</td> | <td>Machine Lube Duration</td> | ||
| − | <td> | + | <td>[[Machine Lube Duration]]</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Lube Machine At Bend Count</td> | <td>Lube Machine At Bend Count</td> | ||
| − | <td> | + | <td>[[Lube Machine At Bend Count]]</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Pulse Machine Lube Pump</td> | <td>Pulse Machine Lube Pump</td> | ||
| − | <td> | + | <td>[[Pulse Machine Lube Pump]]</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Watch For Machine Lube Complete Input</td> | <td>Watch For Machine Lube Complete Input</td> | ||
| − | <td> | + | <td>[[Watch For Machine Lube Complete Input]]</td> |
</tr> | </tr> | ||
</table> | </table> | ||
Revision as of 21:38, 28 January 2009
Contents |
In the CNCProcessor.cfg File
The CNCProcessor.cfg contains the property values that allow you adjust the Machine Lube setup in CNC Bender. For more about the config file, see CNCProcessor.cfg.
Configuration Section: "Machine Lube"
The settings in this file are separated by sections with section names in square brackets. This is an example:
[Machine Lube] Machine Lube Duration=5000 Lube Machine At Bend Count=100 Pulse Machine Lube Pump=1 Watch For Machine Lube Complete Input=0
The four values control the machine lube features in CNC Bender.
| Property Value | Read |
| Machine Lube Duration | Machine Lube Duration |
| Lube Machine At Bend Count | Lube Machine At Bend Count |
| Pulse Machine Lube Pump | Pulse Machine Lube Pump |
| Watch For Machine Lube Complete Input | Watch For Machine Lube Complete Input |
Other Pages
- Back to CNC Bender Technical Notes
- See Auto Lube for details on how to test the Auto Lube system
- See Configuring Machine Lube Settings
- See CNCProcessor.cfg
