Difference between revisions of "Configuring Machine Lube Settings"
From ATTWiki
(→Configuration Section: "Machine Lube") |
(→Configuration Section: "Machine Lube") |
||
| Line 48: | Line 48: | ||
<br><br> | <br><br> | ||
| + | |||
| + | |||
| + | |||
| + | ===Testing the Settings=== | ||
| + | See [[Auto Lube]] for testing the setup in CNC Bender. | ||
==Other Pages== | ==Other Pages== | ||
Revision as of 21:50, 28 January 2009
Contents |
In the CNCProcessor.cfg File
The CNCProcessor.cfg contains the property values that allow you adjust the Machine Lube setup in CNC Bender. For more about the config file, see CNCProcessor.cfg.
Configuration Section: "Machine Lube"
The settings in this file are separated by sections with section names in square brackets. This is an example:
[Machine Lube] Machine Lube Duration=5000 Lube Machine At Bend Count=100 Pulse Machine Lube Pump=1 Watch For Machine Lube Complete Input=0
The four values control the machine lube features in CNC Bender. Read about each of them here:
| Feature | Read |
| Lube for how long? | Machine Lube Duration |
| How many bends to the next lube? | Lube Machine At Bend Count |
| Pulse the output? | Pulse Machine Lube Pump |
| Keep going until the lube is complete? | Watch For Machine Lube Complete Input |
Testing the Settings
See Auto Lube for testing the setup in CNC Bender.
Other Pages
- Back to CNC Bender Technical Notes
- See Auto Lube for details on how to test the Auto Lube system
- See Configuring Machine Lube Settings
- See CNCProcessor.cfg
