TubeCAD - Blockups With Angles

From ATTWiki
Revision as of 15:09, 26 February 2009 by Mcone (Talk | contribs)

Jump to: navigation, search

Follow these steps to set blockups to use angles:

Contents

Start: Blockups without angles

Tcad blockup withangle1.jpg

Step 1

Right click and choose Global Layout Settings
Tcad blockup withangle2.jpg

Step 2

Choose Blockups
Tcad blockup withangle3.jpg

Step 3

The modified blockups

Tcad blockup withangle4.jpg

Retrieved from "http://www.advancedtubular.wiki/index.php?title=TubeCAD_-_Blockups_With_Angles&oldid=10159"