Software License Program ID List

This is a list of Program IDs for Advanced Tubular licenses.

How Our Licenses are Controlled with PIDs

About Hardware Keys

How They Work

We track licenses hardware some call "dongles." We refer to these devices as "hardware keys" because they are based on a physical device that you can carry and plug as opposed to an intangible software key that uses data to control the licenses. Each of our hardware keys contain unique information about your license setup. It does this with memory that we can setup based on what you purchased from us. Read the list at the right for more details.

* When you purchase a license, we program the appropriate program identification (PID) number into the hardware key memory. When you install and run the software you purchased, the software searches for our hardware key and checks for the appropriate PID value in the key. If it finds the correct PID, then it is allowed to run. Multiple ID values can be entered into a single hardware key. These IDs values work in either TIME LIMITED or PERMANENT hardware keys. When you run KeyCheck with a USB hardware key plugged in, you should see at least one of these ID values in the list.

We track licenses hardware some call "dongles." We refer to these devices as "hardware keys" because they are based on a physical device that you can carry and plug as opposed to an intangible software key that uses data to control the licenses. Each of our hardware keys contain unique information about your license setup. It does this with memory that we can setup based on what you purchased from us. Read the list at the right for more details.

When you purchase a license, we program the appropriate program identification (PID) number into the hardware key memory. When you install and run the software you purchased, the software searches for our hardware key and checks for the appropriate PID value in the key. If it finds the correct PID, then it is allowed to run. Multiple ID values can be entered into a single hardware key. These IDs values work in either TIME LIMITED or PERMANENT hardware keys. When you run KeyCheck with a USB hardware key plugged in, you should see at least one of these ID values in the list.

CNC Bender Related PIDs

PID Value	Program Licensed
315	CNC Bender ProControl
317	CNC Bender ProControl Offline
339	CNC Bender LiteControl
340	CNC Bender LiteControl Offline
341	DOD List Editor
352	CNC Bender ProControl Push Bend Option
353	CNC Bender ProControl PDA RVG Option
357	CNC Bender ProControl - v12-20100407
358	CNC Bender LiteControl - v12-20100407

Benderlink Related PIDs

PID Value	Program Licensed
306	Benderlink for Keins/Chiyoda
307	Benderlink for Flexbender
308	Benderlink for Keins/Chiyoda Offline Programmer
309	Benderlink for U.T.E.
312	Benderlink for Trumpf-Pulzer
313	Benderlink for Eagle P2
314	Benderlink for Eaton Leonard
316	Benderlink for CNC Bender
318	Benderlink for Keins/Chiyoda Diagnostic
319	Benderlink for Addison MK5 to Supravision
321	Benderlink for Pines/Laservision
324	Benderlink for Supravision
325	Benderlink for Crown
326	Benderlink for MiiC
327	Benderlink for MK3 to Vector
328	Benderlink for Ped - Data Transfer Module
329	Benderlink for Ped - Data Transfer Management Module
330	Benderlink for Addison MK5 to Vector
333	Benderlink for BLM VGP
334	Benderlink for Keins/Chiyoda v5
335	Benderlink for Keins/Chiyoda v5 - Offline
338	Benderlink for SolidWorks
343	Benderlink for AMCS (Adaptive Motion)
344	Benderlink for Faro
346	Benderlink for MiiC DRMIII-15 Robotic Bender
348	Benderlink for Chiyoda and KEINS - v5
350	Benderlink for YSE - For linking YSE Controls to Vector Tube Measuring Centers
359	DOCS2Addison Benderlink

List of all PIDs

PID Value	Program Licensed
301	TubeCalc
302	Bender to XYZ Calculator - v4 for use in Benderlink for Chiyoda and KEINS
303	Overbend Calculator
304	Sumitube Calculator
305	FIF Translator (obsolete)
306	Benderlink for Keins/Chiyoda
307	Benderlink for Flexbender
308	Benderlink for Keins/Chiyoda Offline Programmer
309	Benderlink for U.T.E.
310	XYZ to Bender Calculator for U.T.E.
311	Graphics Module for U.T.E.
312	Benderlink for Trumpf-Pulzer
313	Benderlink for Eagle P2
314	Benderlink for Eaton Leonard
315	CNC Bender ProControl
316	Benderlink for CNC Bender
317	CNC Bender ProControl Offline
318	Benderlink for Keins/Chiyoda Diagnostic
319	Benderlink for Addison MK5 to Supravision
320	TubeCAD Pro
321	Benderlink for Pines/Laservision
322	TubeCalc 3
323	AutoCAD DXF to Bender
324	Benderlink for Supravision
325	Benderlink for Crown
326	Benderlink for MiiC
327	Benderlink for MK3 to Vector
328	Benderlink for Ped - Data Transfer Module
329	Benderlink for Ped - Data Transfer Management Module
330	Benderlink for Addison MK5 to Vector
331	Network License Manager
332	Unassigned
333	Benderlink for BLM VGP
334	Benderlink for Keins/Chiyoda v5
335	Benderlink for Keins/Chiyoda v5 - Offline
336	Solid Edge 2 Bender Converter
337	TubeCAD Lite for Clark Fixture Modular Gauges
338	Benderlink for SolidWorks
339	CNC Bender LiteControl
340	CNC Bender LiteControl Offline
341	DOD List Editor
342	Autodesk Inventor to Bender
343	Benderlink for AMCS (Adaptive Motion)
344	Benderlink for Faro
345	FIF Translator 4.1 - Extended Supravision Conversion and Output
346	Benderlink for MiiC DRMIII-15 Robotic Bender
347	Reserved
348	Benderlink for Chiyoda and KEINS - v5
349	Bender to XYZ - Version 5 - For calculating centerline XYZ data from Bender data.
350	Benderlink for YSE - For linking YSE Controls to Vector Tube Measuring Centers
351	TubeCAD Pro v8-20100204 (32/64 bit)
352	CNC Bender ProControl Push Bend Option
353	CNC Bender ProControl PDA RVG Option
354	VTube-STEP
355	VTube-PRO
356	VTube-LASER
357	CNC Bender ProControl - v12-20100407
358	CNC Bender LiteControl - v12-20100407
359	DOCS2Addison Benderlink