VTube-STEP Updates

Import tube data from solid models, then produce reports, and send data to benders. Back to VTube-LASER Back to VTube-PRO Back to VTube-STEP See the VTube Software Maintenance Plan page

VTube-STEP - Third Quarter - 2012

July 15, 2012

VTube-STEP v1.77

New adjustable import and export interface with more options, reset XYZ to Zero

VTube-STEP - First Quarter - 2012

<tr> <td width="150">March 31, 2012</td> <td width="200">VTube-STEP v1.76.3</td> <td width="200">Reverse calc orients the first bend leg up like in TubeCalc, User interface adjustments</td> <td></td> </tr>

<tr> <td width="150">March 15, 2012</td> <td width="200">VTube-STEP v1.76</td> <td width="200">User interface adjustments</td> <td></td> </tr>

<tr> <td width="150">February 07, 2012</td> <td width="200">VTube-STEP v1.75.3</td> <td width="200">Export TubeCalc Files</td> <td></td> </tr>

VTube-STEP - Fourth Quarter - 2011

<tr> <td width="150">October 20, 2011</td> <td width="200">VTube-STEP v1.73</td> <td width="200">New Ribbon Stripe Excel file import</td> <td></td> </tr>

VTube-STEP - Second Quarter - 2011

<tr> <td width="150">May 27, 2011</td> <td width="200">VTube-STEP v1.66</td> <td width="200">New save changes dialog</td> <td></td> </tr>

<tr> <td width="150">May 19, 2011</td> <td width="200">VTube-STEP v1.65</td> <td width="200">New navigation pane, new TubeCalc import, new report templates, removed the tab menu in the header.</td> <td></td> </tr>

<tr> <td width="150">April 1, 2011</td> <td width="200">VTube-STEP v1.63</td> <td width="200">Improved graphics performance, enhanced 180 degree extraction</td> <td></td> </tr>

VTube-STEP - First Quarter - 2011

<tr> <td width="150">March 8, 2011</td> <td width="200">VTube-STEP v1.62</td> <td width="200">Improved Outer Diameter and Wall Thickness value detection, new User Guide and Help File</td> <td></td> </tr>

<tr> <td width="150">February 21, 2011</td> <td width="200">VTube-STEP v1.6</td> <td width="200">Improvements to VTube-LASER mainly</td> <td></td> </tr>

<tr> <td>February 10, 2011</td> <td>VTube-STEP v1.59</td> <td width=150>Change the linear units button</td> <td></td> </tr>

VTube-STEP - Second Quarter - 2010

<tr> <td>April 20, 2010</td> <td>VTube v1.4</td> <td width=150>Added automatic 180-degree bend support</td> <td></td> </tr>

VTube-STEP - First Quarter - 2010

<tr> <td>March 23, 2010</td> <td>VTube-Step v1.31</td> <td>Language fix in edit controls</td> <td></td> </tr>

<tr> <td>March 22, 2010</td> <td>VTube-Step v1.3</td> <td>Support for export to CSM bender data files</td> <td></td> </tr>

<tr><td>March 19, 2010</td><td>VTube-Step v1.2</td><td>Projection tolerance decimal places increase to 5</td></tr> <tr><td>March 18, 2010</td><td>VTube-Step v1.1</td></tr> <tr><td>March 15, 2010</td><td>Original VTube-STEP released</td></tr> </table>