Change the VTube User Interface Language
|
|
|
Change Method 1 - Run a Language Installation Program
You can change the VTube user interface file by running a language setup file.
Step 1 - Close VTube
Step 2 - Download the Language Installation Program
Download the language installation file at the VTube-LASER or VTube-STEP support site:
Step 3 - Run VTube
Change Method 2 - Manually Select a New VTL File
The first method of changing the interface is to select a new VTube Language (VTL) file from inside the System Options following these steps:
Step 1 - System Options
Enter System Options and press the Choose New Language button in Language Setup:
Step 2 - Choose a new Language File
Choose a new language file from the VTL files listed:
Step 3 - Press OK
Press OK in the dialog:
Step 4 - Close the System Options
Step 5 - Close VTube
Step 6 - Reopen VTube
Step 2 - Enter System Options
Press the System Options button in the toolbar.
Step 3 - Enter System Options
Press the Math Setup tab, then the Decimal tab.
Step 4 - Change the Decimal Setup
Press the Math Setup tab, then the Decimal tab.
Step 5 - Switch to the Project Setup Tab
Change to the project setup tab and press the Set Project Default button the new default for clearing VTube.
Setup Complete
Now, whenever VTube is cleared for a new project, the new decimal places setup will take effect.
Other
- Back to VTube-LASER
- Back to VTube-PRO
- Back to VTube-STEP
- See the VTube Software Maintenance Plan page
