VTube-STEP v1.79

Revision 1.79 Back to VTube-STEP Back to VTube Software Updates Back to VTube-LASER

• See VTube-LASER Customer Support Page to download the latest version.

Transfer Tubes to CAM2 Measure 10

• Enter the tube data in VTube - or scan the tube with the FARO, then save CAM2 Measure 10 tube data for import into CAM2.
• Save the MASTER or the MEASURED.
• Save using a Popup menu in the XYZ grid, or save from the the File tab.

Added Split Bend collection feature in Collect Control in STEP mode

• Split bend (for handling 180 degree bends or greater) was available in LASER mode - now it is available in STEP mode too.
• This means that you can also display compress LRA data with two 90s being combined to show a 180 degree bend in the LRA grid and the reports.
• In STEP mode, you can select an arc section that* becomes the guide for the intrados and extrados - showing VTube where to form the split bend centerline.
• The split construction model now displays in STEP mode.
  

Added new Radius Table in XYZ pop-up grid for storage of often-used radii

• Store commonly used radii in a table for use in the future.
• Any number can be added to the list.
• VTube can now output TRUE radius as well as NOMINAL radius values based on the radius table.

Other Changes

• Fixed slow dragging control windows in STEP mode The End Scan Diameter
• Qualification Tolerance value is now in the Measure Setup menu of LASER mode
• The Maximum Number of Points Allowed in Cylinder Laser Stripe value is moved to the Measure Setup menu of LASER mode
• The Spin Edit controls in the Measure Setup can now be manually set with the keyboard.
• Faster saving and loading of VTube-LASER persistence files makes VTube load and close faster
• New options in XYZ pop-up menus
• The formula for building the centerline in the split bend area is improved and more reliable.

Other Pages

• Back to the VTube-LASER page
• See VTube-LASER Customer Support Page to download the latest version.