VTube-STEP v1.81

Revision 1.81 Back to VTube-STEP Back to VTube Software Updates (for LASER Mode) Back to VTube-LASER

• See VTube-STEP Customer Support Page to download the latest version.

New Winton ECNC 4 Bender Setup

This version can write ECNC version 4 offline program files. Every value that can be setup in ECNC can also be setup in VTube-STEP.

New Separate Report Template Setup for STEP and LASER

• Previous versions had identical setups in both modes.
• Some report templates are only appropriate in LASER because LASER handles inspections.
• Now the setup of each is stored separately.

New Supravision Project Wall Thickness Import/Output

• Previous versions did not save the wall thickness
• This version imports and exports the wall thickness value.

New Supravision Project Qualification Tolerance Envelopes Import/Export

• This version now imports and exports these values:
  • Default Qualification Envelope Tolerance
  • A End Length Qualification Tolerance
  • B End Length Qualification Tolerance
  • A End Angle Qualification Tolerance
  • B End Angle Qualification Tolerance

New Inspection Grid Row Count Control

• VTube now controls the INSPECTION grid row count with the MASTER data row count rather than the MEASURED data row count.
• This allows the grid to be populated even if the Measured data is cleared.

Other Pages

• Back to the VTube-LASER page
• See VTube-LASER Customer Support Page to download the latest version.