CNC Bender v12-20130617
v12-20130617
|
|
NEW: Password System
NEW OPTION in LOW LEVEL MENU
|
In the Low Level menu, a new option that allows for the enabling of password protection for option lists is added. This feature can only be changed by entering the Low Level menu, which itself requires a MASTER password to enter. |
|
NEW PASSWORD IN MAIN INTERFACE
|
In the main interface, I created a password system that allows a supervisor to enter a second unique password on the main interface in order to edit the options in CNC Bender. This is the screen where the supervisor enters the password: |
|
| If the password entered in the box is incorrect, then this timed message displays: |
|
| If the password is correct, then this timed message displays: |
|
| The password remains in the edit box for up to 15 minutes. As long as the correct password is entered in the box, all options in the main interface can be edited. |
|
|
The options edit password is unique from the master password. The master password is required to enter Low Level menus. The options edit password will not allow access to the Low Level menus. The only place to reset both the master password and the “options edit” password is in the Low Level menus. If the supervisor has entered a correct password in the main interface, then all options everywhere in the main interface can be edited by anyone until that password is cleared. The “Clear Password Authorization” button allows the user to clear the password when finished editing options. |
15 MINUTE TIMER
|
As a safety measure, the options edit password will automatically clear after 15 minutes, and a dialog will display like shown here. If this dialog appears, the authorized user will need to go back to the password screen and reenter the password before continuing. |
|
"REQUIRES AUTHORIZATION" MESSAGE
|
In the main interface, if an unauthorized user tries to edit a protected option, then this message displays for a couple of seconds, then the keyboard closes: |
|
Other Pages
- Back to CNC Bender
- Back to CNC Bender Software Updates
- See CNC Bender General Information
- See Teach Mode
- See Custom Commands
