VTube-LASER v2.2

Revision 2.2 Back to VTube-STEP Back to VTube-STEP Revisions Back to VTube Software Updates (for LASER Mode) Back to VTube-LASER See VTube-LASER Customer Support Page to download the latest version.

ENHANCED: Improved Cut Plane Features

Moved Cut Plane Button to Top CUT PLANE has become more important as of the release of FARO's v6 HD blue laser scanner. The Cut Plane button has been moved to the top of the Measure Process menu.
Improved Cut Plane Offset Menu The CUT PLANE OFFSET menu has been improved so that the offset value automatically receives FOCUS when loading this window. You can type the new value immediately, and then press the ENTER key to close the window (a new feature also).

ENHANCED: Automatically Export STEP to SOLIDWORKS

Now automatically send an exported STEP file to SolidWorks.

NEW: User Interface Changes

VTube Project Filename Box There is a new current VTube Project filename box in the upper left corner. This box now shows the entire path of the current project file, so that there is no doubt about which file will be saved if you press the Save button. The text in this box can be selected and copied to the clipboard. Pulldown Menu The pulldown menu no longer stays open on the screen after a project load. The pulldown menu now immediately updates the most recently used file list when you SAVE a new project.

NEW: Handles International Floating Point with Commas

VTube-LASER can now handle non-decimal formats of floating point numbers during measurement. This allows floating point numbers that use commas to work in VTube-LASER.

NEW: System Option Folder Icons

The new icons in System Options help you know where each value is stored - either as a GLOBAL value for all projects, or as a UNIQUE setup for every project file. Gear Folder Icon This folder indicates that the value is stored in the persistent configuration file. This means that the value will be the same for all projects. Cubes Folder Icon This folder indicates that the value is stored in the project file. This means that the value can be unique for all projects.

NEW: MAJOR Features Added to STEP Mode

STEP mode has these two new features: Unbend any bend. Select solid model components and unbend them with tube straights. See VTube-STEP v2.1 for details.

Other Changes

• CONFIGURATION PATH CHANGE: The VTube configuration file location was in "c:\ProgramData\VTube", but this caused issues for some customers with computers using restricted rights. Now it is moved to the "C:\Users\Public\Documents\VTube\Config" folder - which is open for all users with multiple Windows logins.
  
  

• APLINE M4 EXPORT CHANGE: The Alpine M4 Export now includes springback compensation with overbend in the bender data if the springback checkbox is selected.
  
  

• VIEWPORT CHANGE: The DELETE key can now delete selected models from the screen. (Only F12 would delete models in previous versions.)
  
  

Other

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER
• See VTube Language Editor