VTube-STEP v2.5

Revision 2.5 Back to VTube-STEP Back to VTube-STEP Revisions Switch to VTube-LASER updates in VTube Software Updates Switch to VTube-LASER

• See VTube-STEP Customer Support Page to download the latest version.

NEW: Project File Save Notification Proves the Project Was Saved

Previous versions of VTube were quiet when you saved a project file. That made some of our customers understandably nervous. So now VTube always shows a quick notification at the top of the screen when you save a project file. The window displays for a few seconds then disappears automatically. But you can even keep working when this window is open because you can click on other parts of VTube even while this notification is on the screen.

NEW: HOT Keys Control-L (Load) and Control-S (Save) for VTube Project Files

These new hotkeys are a simple thing- but they'll make your life much easier if you're a hotkey user. Try it. Press CTRL-L to load a project file, then CTRL-S to quickly save it again. It's about as easy as it gets. (The new project save notification window described above will display every time you press CTRL-S.)

NEW: CALCULATE TUBE ELONGATION PERCENTAGE FEATURE

Now VTube-LASER can calculate Tube Elongation Percentage by subtracting the current CUT LENGTH from the MEASURED LENGTH - then calculate the percentage by comparing that change to the total ARC LENGTHS in the measured tube. The formula used is (Measured Length - Cut Length) / (Arc Length Sum for Whole Tube) X 100

Other

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER