VTube-LASER v2.6
|
Revision 2.6 Build 108
|
|
If You Use Cut Planes - Then You Need This New Version
This release is all about CUT PLANES. So if you use cut planes to automatically removed points behind or around the tube, then this a very big release for you. If you have to measure tube assemblies with tubes near each other, then you will want to learn this version. If you measure tubes or wires that bend back on themselves, then this release is very important for you.
Here are the big items in this release:
1 - Use any number of MULTIPLE CUT PLANES simultaneously.
2 - CUT PLANES are measured ON-THE-FLY during any tube measurement.
In previous versions, the CUT PLANE measurement had to be performed before you started measuring the tube. Now you can measure new cut planes even if you are in the middle of measuring a tube - then continue where you left off after you measure a new Cut Plane.
3 - CUT PLANES can be turned ON or OFF at any time - even in the middle of measures.
4 - CUT PLANE SETUPS are stored in project files and can be RECALLED from project files.
5 - CUT PLANES are automatically remembered by VTube even if you shutdown VTube or turn the computer off for use the next time you connect to the arm.
6 - DIAMETER CUT PLANES is a brand new feature that will revolutionize how you measure tubes in tight spaces or in assemblies, or wire forms that bend back on themselves.
This feature lets you scan across several diameters or objects of any kind - and still AUTOMATICALLY find only the diameter you want to keep. (This feature was developed in collaboration with AIM Inc. - the manufacturer of wire benders. It works great on tube assemblies too - like headers and HVAC assemblies.)
Other Pages
- Back to VTube-STEP
- Back to VTube Software Updates (for LASER Mode)
- Back to VTube-LASER
- See VTube Language Editor
