VTube-LASER Cylinder Fit Tolerances

Back to the Main VTube-LASER web page Back to VTube-LASER Back to VTube-STEP

The Cylinder Fit Tolerances are values that control how VTube-LASER detects poor cylinder measurements. This site contains recommendations for value setup.

Default Setup

The default setup has 3 Rename any of the files in the RED box to either wav file in the BLUE box. 4 It's a good idea to rename the original wav files in the blue box to keep a backup copy of them so that you can recover them if you don't like the result of the change.

Testing Sounds For Your VTube Computer

Not all computers play these sound files the same way. For example some computer speakers go into an idle shutdown mode that can never start up fast enough to play the short sounds. Before changing the sounds configuration, you can double click on any sound file, and Windows should play it for you. If you hear the sound when you double-click on it, then you should be able to use it in VTube-LASER for feedback.

Other Pages

• Back to VTube-LASER
• Back to VTube-STEP