Chiyoda Communications with VTube

Back to VTube-STEP

Which files are used to create parts in the Chiyoda?

The files used are .CHS files.

Steps to send files between the Chyioda and VTube-STEP

STEP 1 Create a template in the Chiyoda with the number of bends the new part will have.
STEP 2 Save the template created on the Chiyoda onto a thumb drive and bring it to the VTube-STEP computer.
STEP 3 Load in the desired part into VTube-STEP (must match the bend count on the template created in the bender)
STEP 4 In VTube-STEP under the Import/Export tab > Export > load Chiyoda Ex File - CHS

Steps to RESTORE a Configuration from a Backup

STEP 1 Press the System Options button.
STEP 2 Press the RESTORE and Reset VTube Configuration from a VTube Zip Backup File.
STEP 3 Find and open the backup file.
STEP 5 Press Continue in the warning dialog.
STEP 6 Press OK.

Other Pages

• Back to the VTube-STEP page
• Back to the VTube-LASER page