Master Power On

From ATTWiki
Revision as of 23:02, 29 June 2006 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Master Power On is the state in which all of the safety stops (E-stops) are cleared and the bender pump is switched on.

In this state, the Master Power On button will illuminate green.

If an E-stop, safety mat, or bend-arm safety plate is tripped, then the electronics in the bender will switch the Master Power OFF.


--Mcone 19:02, 29 June 2006 (EDT)

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Master_Power_On&oldid=1628"