CNC Bender v12-20111222

v12-20111222 Back to CNC Bender Software Updates

NEW - Servo-controlled PRESSURE DIE Motion

Servo-controlled pressure die positioning is much more accurate and the motion is smoother. This feature is especially useful for extreme accuracy during part capture. Parts can be accurately captured by the pressure die during PREBEND (Load), BENDING, and POSTBENDING (Unloading).

NEW - Options for PD Servo Motion

Bending Options: PD Servo Retract Position This feature allows you to partially retract the pressure die during Multi-Bending and immediately after a bend.
Overall Options: PD Jog Position After Bends This feature allows you to open the pressure die slightly after a bend to relieve pressure before a mandrel pull.

NEW - CNC Processor Builds a Part Name File in the LOGS Folder

When CNC Processor encounters a PART NAME command in the processor list, it now saves the part name to the a "cncprocessor_partname.log" file in the c:\cnc\logs folder. This file contains only the part number, and can be accessed by any external process to allow the external process to know which part is currently running.

ENHANCED - Seam Find Detection Logic

Several new PREBEND options allow for better control of the seam detect option in the Rotate Axis. Added new COMDEF to set the seam detect rotate axis jog speed: Set Rotate Jog Speed.comdef Added new HELP files to explain the new PREBEND seam detect options. Added Sensor advance and retract COMDEFs (Seam Sensor

Other

Importing older part files now brings the Tool data into memory also. Older file imports no longer reset the bender name. New COMDEFS were added: Set Rotate Jog Speed.comdef Seam Sensor Retract.comdef Seam Sensor Advance.comdef New CIO objects were added: Output_SeamDetectSensor_Advance Output_SeamDetectSensor_Retract New help files were added: Option_PrebendSeamDetectDegreesPerSecond.rtf Option_PrebendSeamDetectFeedAbsoluteSpeed.rtf Option_PrebendSeamDetectFeedAbsolutePosition.rtf ExternalFileToRunWhenPartChangesInProcessor.rtf This help file was updated: Option_PrebendSeamDetectMode.rtf

Other Pages

• Back to CNC Bender
• Back to CNC Bender Software Updates
• See CNC Bender General Information
• See Teach Mode
• See Custom Commands