FARO CAM2

FARO CAM2 software for measuring prismatic shapes. It is used by tube fabrication customers on FARO arms along with VTube-LASER to measure components around tube shapes. Customers measure tube shapes quickly with VTube-LASER with the laser scanner, then output parametric tube data to CAM2. This version of CAM2 software released in 2011 (See FARO news release).

CAM2 Measure 10 and VTube-LASER Working Together

Measure Tubes with VTube then Export to CAM2 Files Since year 2010, FARO has started selling VTube-LASER as a quicker method of tube measuring. (FARO is the exclusive distributor for VTube-LASER in North and South America.) General Workflow for VTube to CAM2 The workflow process is to scan a tube with VTube, then continue with measuring components around the tube in CAM2. The method is to leave the tube in the same location when measuring in the two programs. The correct position in space is transferred into CAM2 Measure 10 as long as the tube is not moved. Benefits of Measuring Tube with VTube Benefit 1 - Built-in Automated Process for Measuring Tubes The benefit of using VTube-LASER for tube scanning is that VTube-LASER has built-in knowledge of measuring tube shapes. When you measure a tube with VTube, the methods for gathering the information and calculating the centerline, intersection points, and bend data are preprogrammed as a series of steps that never have to be scripted by a user into VTube-LASER. VTube knows what you should give it, and it will always request that data in order using the Tube Measuring menu. Benefit 2 - Built in Feedback to Increase Confidence in Data VTube-LASER has special procedures that that verify the level of confidence you should have in the incoming data. There are series of crosschecks just for measuring tubing, both mathematical and on-screen, that allow users to know if the data is good. Export as Parametric Tubes VTube-LASER exports CAM2 Measure 10 parametric tube files for measuring brackets and components around the tube. Both the MASTER and the MEASURED tube shapes can be exported in the FILE tab sub-menus for each tube centerline.

Export as Parametric Tubes VTube-LASER exports CAM2 Measure 10 parametric tube files for measuring brackets and components around the tube. Both the MASTER and the MEASURED tube shapes can be exported in the FILE tab sub-menus for each tube centerline.

Importing to CAM2 Use the Import/Export option in the File pulldown menu to import the CAM2 file that VTube builds. The tube shapes can be imported into CAM2 as NOMINAL (VTube MASTER), or ACTUAL (VTube MEASURED).

Benefits of Using VTube-LASER

Benefit 1 - Built-in Automated Process for Measuring Tubes The benefit of using VTube-LASER for tube scanning is that VTube-LASER has built-in knowledge of measuring tube shapes. When you measure a tube with VTube, the methods for gathering the information and calculating the centerline, intersection points, and bend data are preprogrammed as a series of steps that never have to be scripted by a user into VTube-LASER. VTube knows what you should give it, and it will always request that data in order using the Tube Measuring menu. Benefit 2 - Built in Feedback to Increase Confidence in Data VTube-LASER has special procedures that that verify the level of confidence you should have in the incoming data. There are series of crosschecks just for measuring tubing, both mathematical and on-screen, that allow users to know if the data is good.

Export as Parametric Tubes VTube-LASER exports CAM2 Measure 10 parametric tube files for measuring brackets and components around the tube. Both the MASTER and the MEASURED tube shapes can be exported in the FILE tab sub-menus for each tube centerline.

Importing to CAM2 Use the Import/Export option in the File pulldown menu to import the CAM2 file that VTube builds. The tube shapes can be imported into CAM2 as NOMINAL (VTube MASTER), or ACTUAL (VTube MEASURED).

CAM2Q (release about 2008)

This version of CAM2 software released in 2008 (See FARO news release). This version has not been tested for communication with any of our software.

CAM2 Measure X - (released about 2005)

CAM2 Measure X1 was released in 2005 (See FARO news release). It can output text files for communication with our Benderlink for FARO software.

Communications between CAM2 Measure X and benders is through the EXPORT - XYZ - TXT feature to Benderlink for FARO software.