VTube-LASER v1.94

Revision 1.94 Back to VTube-STEP Back to VTube-STEP Revisions Back to VTube Software Updates (for LASER Mode) Back to VTube-LASER

• See VTube-LASER Customer Support Page to download the latest version.

NEW: Import CSM M3 Bender Files (VTube-STEP Mode)

VTube now has a Tube Data Storage feature that allows you to store the tube data for every measure. It automatically saves the date-time stamped tube data at alignment after a measure. It allows you to copy the current tube data into storage at any time. Values stored are: General Part Setup Data MASTER tube data MEASURED tube data MEASURED Aligned tube data

NEW: Added the Default Tolerance Value in Part Setup

Some output formats prefer to have a default tolerance built into the export, so now the Default Tolerance value is included in the VTube-LASER Part Setup menu.

NEW: Added to the Popup Menu to Synchronize End Diameters with Main Diameter

The pop up menus for the Part Setup menu (STEP and LASER modes) now allow for the end diameters to be synchronized with the main diameter.

NEW: Previous Paths List in Quick Open

The Quick Open dialog now has a pull-down list that shows all the recent previous paths used to load VTube project files or imported solid model files. Click on the previous path to use, and the folder tree on the left will open the new folder.

Other Changes

Updated the Chinese translation. Updated the German translation. When VTube performs an alignment, it will now automatically switch to the Tangent point deviation menu to show updates in real-time.

Other

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER
• See VTube Language Editor