Setup of SolidWorks Template File Paths

From ATTWiki
Revision as of 19:16, 2 December 2014 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search



VTube-LASER and VTube-STEP can create SolidWorks tubes automatically if SolidWorks is installed on the same computer as VTube.

SolidWorks TEMPLATE paths must be setup for this connection to work. The reason is that VTube will attempt to automatically create a new part file before drawing the tube. Follow these steps to setup SolidWorks.

Solidworks logo.jpg


Contents

Conversion Errors Without Setup

Without setup you will see screens like these:


SolidWorks BuildError1 NoTemplate.png

SolidWorks BuildError2 NoTemplate.png

SolidWorks BuildError3 NoTemplate.png




Screenshot VTube-STEP 1.96 and SolidWorks 2015

Vtube-step solidworks2015.png

Screenshot SolidWorks 2009

Solidworks tube.jpg

Screenshot SolidWorks 2007

Solidworks2007 tube.jpg

Screenshot SolidWorks and CNC Bender Conversion

This is a screenshot of a SolidWorks tube that was converted to a CNC Bender part using Benderlink for SolidWorks.

Blinksw2cncbender.jpg

VTube-STEP

VTube-STEP can automatically build a parametric tube in SolidWorks.

Vtube-step solidworksbuilder.png

Benderlink for SolidWorks

Benderlink for SolidWorks communicates with SolidWorks to transfer data to benders.

Blinksw 1 9.jpg

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Setup_of_SolidWorks_Template_File_Paths&oldid=26098"