VTube NUMALLIANCE Bender Correction

This page describes the use of the VTube-LASER to NUMALLIANCE bender corrections.

Back to VTube-LASER

NUMALLIANCE CORRECTIONS

VTube-LASER now has an export option for NUMALLIANCE CSV files that is used to correct the NUMALLIANCE benders. Note: NUMALLIANCE benders only require the measured data for corrections. Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

Other Pages

• See VTube-LASER
• See VTube-STEP