VTube-LASER Videos
|
See a complete list of VTube-LASER videos on this page.
|
|
Video Subpages Related to Specific Arms
Click on the images to enter the video subpages with videos for specific arms.
Latest Videos
Version 3.1
Video 20220221: Verifying VTube-LASER and Kreon with a Test Cylinder
|
This video shows how to set up and use a test cylinder to verify your measuring system at the beginning of each day. |
|
|
Video 20220216: VTube-LASER Using a Kreon Scan Arm
|
This video shows the connection to a Kreon ACES scan arm with a Solano blue line scanner. |
|
|
Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage
|
This video shows how to calculate tube elongation percentage with VTube-LASER. |
|
Video 20211207: VTube-LASER Correction for Han Jie Benders
|
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638) |
|
Version 3.0
Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube
|
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021) |
|
Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER
|
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021) |
|
Video 20210505: How To Determine Positive and Negative Rotation Directions
|
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube. |
|
Video 20210503: Automatic Reverse Calc
|
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513. |
|
Video 20210421: Why and How to Use MTA (Measured Tube Averaging)
|
Michael Cone shows the why and how of MTA. |
|
Video 202100413: VTube v3 NPS Values Tutorial
|
Michael Cone shows how to use the new NPS values in VTube. |
|
Video 202100406: VTube-LASER Reverse Engineering Tutorial
|
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER. |
|
Video 20210330: VTube-LASER to Transfluid Bender Communications
|
This video shows how easy it is to communicate with Transfluid tProject bender software. |
|
Video 20210313: How to Enter Bender Data of Different Types in the Same Project
|
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data. |
|
Video 20210310: How to Import New Report Templates
|
This video shows how to import new report templates into VTube-STEP and VTube-LASER. |
|
Video 20210212: Switch the FARO Scanner ON and OFF Manually
|
Use this process to quickly switch the FARO scanner on or off manually. |
|
Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)
|
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes. |
|
Video 20201117: Calculate Centerline Radii Using Measure Bend Profile (FARO)
|
Quickly and accurately measure the centerline radius using the Measure Bend Profile process. |
|
Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights
|
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights. |
|
Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges
|
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges. |
|
Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)
|
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm. |
|
Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)
|
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes. |
|
Video 20200923: How to Measure and Qualify Ports on a Tube Using Assembly (FARO)
|
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER Assembly. The same principle can be extended to holes in tube shapes. |
|
Video 20200804: Measuring a Brake Line with a FARO EDGE Arm
|
This video shows VTube-LASER measuring a brake line with a legacy FARO Edge Scan Arm. |
|
Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm
|
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner. |
|
Video 20200709: Real-time Overall Scan Scores Build Confidence (HEXAGON RA8)
|
This video shows how VTube-LASER scan scoring system helps users know they are measuring well. |
|
Video 20200609: How to Use Multiple Versions of the Same Part in One Project
|
This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process. |
|
|
Video 20200515: How Import 180-degree Bend Models
|
This video shows how to import models with 180-degree bends. |
|
|
Video 20200514: How to Change Languages in VTube
|
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface. |
|
|
Video 20200406: Measure Corner Profile with VTube-LASER and FARO Quantum
|
This video shows how to measure a corner profile shape with the Corner Profile measure process using a FARO Quantum arm. |
|
Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar
|
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar. |
|
Video 20200327: VTube UNIVERSITY Training Video: Introduction to Import and Measuring Tube Shape Demo Tube 5 with a FARO Arm
(FARO QUANTUM S ScanArm)
|
This video is a VTube University video designed to accompany training document 20200327..002" this support page. |
|
Video 20200323: VTube UNIVERSITY Training Video: FARO Account Manager Demo Training
(FARO QUANTUM S ScanArm)
|
This video is a VTube University video designed to show how to demonstrate VTube-LASER using a FARO ScanArm. |
|
Video 20200320: VTube UNIVERSITY Training Video: End Scans
(HEXAGON RA8-7 ScanArm)
|
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER. |
|
Video 20200306: VTube-LASER Correction of an OMCG Wire Bender
(HEXAGON RA7-7 ScanArm)
|
This video shows a corrections loop between VTube-LASER and an OMCG wire bender. |
|
Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection
|
You can manually setup the Ethernet port following the steps in this short video. |
|
|
Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms
|
Switching from probe to laser is easy with the three-way toggle button. (Using a HEXAGON RA8 ScanArm) |
|
Version 2.9.21
Video 20200204: How to Measure a Bend Radius with Bend Profile Process
|
See how to use VTube-LASER Bend Profile measure process to measure a bend radius. (Using a FARO Quantum ScanArm) |
|
Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles
|
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. (Using a HEXAGON 8325 ScanArm) |
|
Video 110: Corner Profile Measure Process
|
This demo video shows how VTube-LASER can easily measure corner profiles. |
|
|
Video 107: Corrections Loop with SOCO Beckhoff Controls
|
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls. |
|
Version 2.9.20
Video 105: Measuring a Part with 180-Degree Bends
|
This demo video shows VTube-LASER scanning through a part with two 180-degree bends. |
|
Version 2.9.19
Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square
|
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm. |
|
Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half
|
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half. |
|
Video 102: VTube-LASER is Now Compatible with Baces USB Arms
|
This video shows VTube-LASER working with a Baces USB arm. |
|
Version 2.9.18
Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)
|
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018. |
|
Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend
|
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend. |
|
|
Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm
|
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS. |
|
Video 98: About the Small Diameter Warning
|
This video shows how Small Diameter Warning works along with its setup. |
|
Video 96: VTube-STEP and VTube-LASER New Radius Features
|
See the new radius features in this video. In Part Setup:
|
|
Version 2.9.17
Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.
|
|
Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).
|
|
Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).
|
|
Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).
|
|
Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.
|
|
Version 2.9.16
Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.
|
|
Version 2.9.14
Video 89: MEASURING SMALL TUBES with MICROSCRIBE
| This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER. |
|
Version 2.9.12
Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.
|
|
Version 2.9.11
Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO)
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.
|
|
Version 2.9.10
Video 86: VTube-LASER's LASER SCAN FILTER SOUND
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.
|
|
Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.
|
|
|
Video 84: Measuring Convoluted Tube and Wire with VTube-LASER
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.
|
|
Version 2.9.9
Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.
|
|
Version 2.9.8
Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.
|
|
Video 81: SOCO Bender Correction
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.
|
|
Video 80: TRAX Rail Arm Extender
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.
|
|
Version 2.9.7
Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS
This video demonstrates how to export a report to an external network location.
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.
|
|
|
Version 2.9.4
Video 78: VTube-LASER Corrects an SMT Bender
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.
|
|
Version 2.9.3
Video 77: Build Entire Assemblies to SOLIDWORKS
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.
|
|
Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.
|
Arm used in this video: ROMER Absolute Arm 7325SI |
|
|
|
Arm used in this video: FARO Quantum S ScanArm |
|
Other Pages
- See Retired VTube-LASER Videos
- Back to VTube-LASER
