Inspection Tolerances

Back to VTube-STEP Back to VTube-LASER

Different Tolerances

<tr> <td width=300>

Radial

Use the toolbar button to clear VTube.</td> <td> </td> </tr> <tr> <td width=300>

Linear

Change the values in VTube to whatever you want them be when you perform a project clear in the future.

Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube. (Of course, you can do this, if you really intend to do it.)</td> <td> </td> </tr> <tr> <td width=300>

Angular

Press the System Options button.</td> <td> </td> </tr> <tr> <td width=300>

Other Pages

• Back to the VTube-STEP page
• Back to the VTube-LASER page