Benderlink for SolidWorks NLM Installation

This page addresses how to setup the Network License Manager for use with Benderlink for SolidWorks.

Step 1	Plug the hardware key into the NLM SERVER computer.
Step 2	Install the software from the CD
Step 3	Under the "Hardware Key Data" tab, verify that The "Key Type" is "memo" and that the "Key Serial Number" matches the "Licensed Key Serial Number". Next, check the "Licensed Applications" tab. "Application Name" should say "Benderlink for Solidworks" and "Max Seats" is "1".
Step 4	Install Benderlink for SolidWorks on any workstation that will run the software.
Step 5

<tr> <td bgcolor="#b1b2c5">Step 6</td> <td bgcolor="#b0c2e0" width=300>Run Benderlink for Solidworks. The NLM Server software should report that a user is logged into Benderlink for Solidworks and that there are the correct seats of the software available.

</td> </tr>

</table>