Bend Reduction Editor

Predicting elongation in a tube shape requires complex mathematics that changes per customer application. Benderlink for SolidWorks now allows operators to program their Bend Reduction formula into the program. This is the Bend Reduction Function editor:

The editor is very powerful because it allows you to enter action Pascal code to define the function that returns the adjusted arc lengths. This is an example bend reduction program included with Benderlink:

Sample Program

var
  BendAllowance: real;
  NewArc: real;
begin
  BendAllowance := 0.64;
  NewArc := ((BendAllowance * blinksw(OD) + (PI/2 * (blinksw(CLR)-0.5 * blinksw(OD) ))) / 90) * blinksw(BENDANGLE);
  //MessageDlg('New Arc Length: ' + floattostr(NewArc), mtInformation, [mbOK], 0);
  result := NewArc;
end;

The Function's Result

The value returned is called the "result". At the bottom of the code (just before the "end;" line), the

result := NewArc;

line of code assigns the value in the NewArc variable to each arc length in Benderlink during conversion.

Accessing Benderlink's Values

There are three special functions that insert values from the bend data during conversion:

Insert the Outer Diameter

blinksw(OD)

Insert the Centerline Radius

blinksw(CLR)

Insert the Bend Angle

blinksw(BENDANGLE)

Each of these are should be formed as a complete word with no spaces between any of the characters.

The Function's Result

The value returned is called the "result". At the bottom of the code (just before the "end;" line), the

result := NewArc;

line of code assigns the value in the NewArc variable to each arc length in Benderlink during conversion.

Mathematical Function List

These are the available math functions:

blinksw(OD)
blinksw(CLR)
blinksw(BENDANGLE)
sqr()
sqrt()
arctan()
cos()
sin()
tan()
abs()
exp()
ln()
log()
int()
frac()
trunc()
round()
arcsin()
arccos()
sign()
not()
PI
ArcCos()
ArcCosh()
ArcCot()
ArcCotH()
ArcCsc()
ArcCscH()
ArcSec()
ArcSecH()
ArcSin()
ArcSinh()
ArcTan2()
ArcTanh()
Cosecant()
Cosh()
Cot()
Cotan()
CotH()
Csc()
CscH()
CycleToDeg()
CycleToGrad()
CycleToRad()
DegToCycle()
DegToGrad()
DegToRad()
GradToCycle()
GradToDeg()
GradToRad()
Hypot()
IntPower()
IsInfinite()
IsNan()
Ldexp()
LnXP1()
Log10()
Log2()
LogN()
Max(
Min()
Power()
RadToCycle()
RadToDeg()
RadToGrad()
RandG()
RandomRange()
Sec()
Secant()
SecH()
Sinh()
Tan()
Tanh()

Bend Reduction Editor

Contents