CNC Bender v10-20080407

CHANGES to CNC BENDER

NEW - Warning for Corrupted CNC Bender Configuration

This version of CNC Bender will clearly warn you if it senses that the CNC Bender configuration file is corrupted.

It also describes the steps for recovering the configuration file:

Recovery Steps

WARNING: CONFIGURATION PROBLEM

The CNC Bender CONFIGURATION file was probably CORRUPTED during a system or power failure. Reason:The RADIUS LEVELS is ZERO, which is never a normal value in CNC Bender setup.

Recovery steps are simple: Every part or tool file that you saved to disk contains backup configuration information. You can recover the configuration for this machine by pointing to and loading one of your good part files. (Use one that you know is a part that was saved before the configuration file was corrupted.)

RECOVERY STEPS

Step 1 - Go to the LOW LEVEL menu

Step 2 - In the Low Level menu, go to the SYSTEM menu

Step 3 - Press the "Restore CFG from Part" button

Step 4 - Choose a part file to load

Step 5 - Press "Load the File" button - The "File was successfully loaded" message will appear. Press OK

Step 6 - Eit the Low Level menu

Step 7 - Exit CNC Bender

Step 8 - Restart CNC Bender

The recovery will be complete

Other Pages

• Back to CNC Bender
• Back to CNC Bender Software Updates