Push Bending Profile Table

From ATTWiki
Revision as of 20:13, 25 April 2008 by Mcone (Talk | contribs)

Jump to: navigation, search

Cncbender logo.jpg

Operatorstation model.jpg

Contents


About Push Bend Profile Tables

Cncbender v11 pushbend profilesetup.jpg

This is a sample Push Bend Profile Table. Each profile row contains a profile setup for a given radius. An unlimited number of profile values can be entered. Using this method of calculation, it is possible to calculate different Push Bends by indicating the new bend angles.

Because we use this method of calculation, it is possible to correct push bent parts using measuring center connections. Correct the bend value, and the push bend values are automatically calculated during AutoBuild.




Loading the Profile Table Menu

Cncbender v11 pushbend button.jpg

Cncbender v11 pbprofile close.png
The Profile Table Setup is entered from the FRB screen only. The button is to the right in the button toolbar at the top.



Profile Values

Grid Describing the Profile Value Names
Value Name Description
Profile Name The name is how the profile is displayed and selected in the Bend Options.
Arm Angle This is the final angle of the arm during push-bending.
Arm vAdjust This allows the velocity of the bend arm to be adjusted by a percentage of the original calculated velocity.
Feed Position This is how far the carriage must travel to achieve the "@ Degrees" value.
Feed Velocity This is the velocity of the carriage during the bend. The velocity of the carriage is used to calculate a starting bend arm motion speed.
@ Degrees This is the angle of the tube that is achieved by the "Feed Position" value above.
Sample Profile Table Setup
Cncbender v11 profiletable.png




Other Pages

See CNC Bender v11-20080424 for information on the first version to enable Push Bending