Configuring Machine Lube Settings

In the CNCProcessor.cfg File

The CNCProcessor.cfg contains the property values that allow you adjust the Machine Lube setup in CNC Bender. For more about the config file, see CNCProcessor.cfg.

Configuration Section: "Machine Lube"

The settings in this file are separated by sections with section names in square brackets. This is an example:

[Machine Lube]
Machine Lube Duration=5000
Lube Machine At Bend Count=100
Pulse Machine Lube Pump=1
Watch For Machine Lube Complete Input=0

The four values control the machine lube features in CNC Bender.

Property Value	Read
Machine Lube Duration	Read Machine Lube Duration
Lube Machine At Bend Count	Read Lube Machine At Bend Count
Pulse Machine Lube Pump	Read Pulse Machine Lube Pump
Watch For Machine Lube Complete Input	Read Watch For Machine Lube Complete Input

Other Pages

• Back to CNC Bender Technical Notes
• See Auto Lube for details on how to test the Auto Lube system
• See Configuring Machine Lube Settings
• See CNCProcessor.cfg