Benderlink for Addison to Vector 5.0

From ATTWiki
Revision as of 17:33, 20 February 2009 by Mcone (Talk | contribs)

Jump to: navigation, search

Blink addison elvector logo.jpg

Contents


Check.jpg New - Supports Eaton Leonard Legacy Communications Protocol

Benderlink for Addison now supports the Eaton Leonard legacy communications protocol. The protocol simulates communications with Premier, EL-2000, and Velog controls.


Check.jpg New - Combination of Adjacent Bends When Saving Bender Data

Since Benderlink can now handle bend angles of 180 degree bends or greater, it is now also able to recombine adjacent bends from the centerline into single bends when exporting to bender files.

This is a sample data chart before combination:

Blinksw combinedbends1.jpg

This is the same data chart after combination:

Blinksw combinedbends2.jpg

When saving data to a Supravision file, Benderlink will display this dialog if it finds any bends that can be combined:

Blinksw combinedbends3.jpg

If you choose to combine, then a report will be displayed after the combination is complete:

Blinksw combinedbends4.jpg



Check.jpg Change - TAURING Data Now Includes Straight Distances

Benderlink for SolidWorks now includes the straights in the TAURING bender data.

Blinksw v2 TauringData.jpg




Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Benderlink_for_Addison_to_Vector_5.0&oldid=10023"