TubeCAD - Importing DXF Files

From ATTWiki
Revision as of 13:59, 10 July 2009 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Follow these steps to set blockups to use angles:

Contents

Start: Blockups without angles

Tcad blockup withangle1.jpg

Step 1

Right click and choose Global Layout Settings
Tcad blockup withangle2.jpg

Step 2

  • Choose Blockups (in the list on the left)
  • Calculation Mode (in the properties list on the right)
  • Set the mode to Low Profile with Angles
  • Click on OK


Tcad blockup withangle3.jpg

Modified Blockups

The modified blockups

Tcad blockup withangle4.jpg


Other Pages

Go back to TubeCAD Pro

Retrieved from "http://www.advancedtubular.wiki/index.php?title=TubeCAD_-_Importing_DXF_Files&oldid=11305"