A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use in Teach Mode
Jog Motions can be entered using a keyboard, or entered using Teach Mode
Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.
The existence of Jog Motions are completely configurable. You can add your own Jog Motions or remove the existing Jog Motions from the user interface using a single configuration file.
Screen 1: Select one of the Edit Custom buttons a bend in the FRB page
