Jog Motion

A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender. (See Screen 1) Custom Commands begin without any Jog Motions (See Screen 2) Add a Jog Motion using the Add a jog motion button Now the Jog Motion exists, but it is unassigned or empty. Click on the Jog Motion name cell to select a Jog Motion. (See Screen 3) Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 4) Jog Motion values can be entered using a keyboard, or entered using Teach Mode Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

Screen 1: Three Jog Motions in a Custom Command - All three run at the same time. Screen 2: An empty Custom Command (no Jog Motions present) Screen 3: Click on an unassigned (empty) Jog Motion cell to select a Jog Motion Screen 4: Select a Jog Motion from the Selection menu

Jog Motion Configuration

• The existence of a Jog Motion in the CNC Bender user interface is completely configurable.
  
  

• You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.
  
  

• You can even rename the Jog Motion name (or translate the motion to another language).