Custom Command

Custom Commands store the moves learned during Teach Mode A single Custom Command can contain any number of simultaneous Jog Motions. In a SINGLE Custom Command, you could teach the bender how to combine any number of axes and actuators into one motion. Every BEND stores up to 10 custom commands. For example, a 5 bend part could have up to 60 additional Custom Commands. (10 in PreBend and 50 for the bends. The last bend's Custom Command is used for PostBend.) Each Bend's Custom Command changes how the bender works after that bend when transitioning to the next bend. OVERVIEW of EDITING a CUSTOM COMMAND Select the "Edit Custom" button of the bend's Custom Command you want to create or edit (See Screen 1) Select one of the ten available Custom Commands (See Screen 2) Setup the Custom Command selected in the Custom Command Editor (See Screen 3) Exit to the FRB menu Press AutoBuild Run the bender OTHER THINGS TO KNOW Custom Commands can be MANUALLY entered and edited without the bender running in Teach Mode. Or Custom Commands can be edited even after they were built using Teach Mode. All Custom Commands are stored in the part file that contains the part data.

Example actuators that could easily be put in a single Custom Command: Feed Axis Rotate Axis Vertical Radius Shift Horizontal Radius Shift Bend Axis Mandrel Retract and Kicker Advance Mist Any actuator Screen 1: Select one of the Edit Custom buttons a bend in the FRB page Screen 2: Custom Commands List Selection Screen 3: Custom Command Editor

Other Pages

• Back to CNC Bender
• Back to CNC Bender Software Updates
• See CNC Bender General Information
• See Teach Mode
• See Jog Motion
• See upgrade CNC Bender v12-20100105