Restart the HASP Service

From ATTWiki
Revision as of 17:59, 25 January 2011 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver:

  • Remove the hardware key(s) from the USB port(s) on the computer.
  • From a command box, type "haspdinst -fr -kp -purge", and press Enter.



This will "force remove", "kill process", and "purge" the process from memory.

  • Reboot the computer.
  • From a command box, type "haspdinst -kp -i" and press Enter.



This will "kill process" and "install" the driver again.

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Restart_the_HASP_Service&oldid=15829"