Restart the HASP Service
From ATTWiki
Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver:
- Remove the HASP hardware key(s) from the USB port(s) on the computer.
- From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory.
- Reboot the computer.
- From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again.
Other
- Back to "Hardware key"
