Restart the HASP Service

Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver:
Go to the Utility Software page and download the HASP Command Line Hardware Key Driver. The haspdinst.exe software is zipped in this download.

Remove the HASP hardware key(s) from the USB port(s) on the computer.
From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory.
Reboot the computer.
From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again.

haspdinst -fr -kp -purge

haspdinst -kp -i

Other