VTube-LASER v1.61

Revision 1.61 Back to VTube-LASER

NEW: Floating End Letters

Floating end letters can be switched on to help identify the ends A and B of the tube. Control the state of the labels in the View Control pane on the right side of the screen.

NEW: Automatically Set End A and End B Diameter

If either End A or End B are set to a value of ZERO, then they will be automatically calculated based on the straight measurement adjacent to the end of the tube.

ENHANCED: New Options in Part Setup

New A-End Diameter and B-End Diameter is added to the Part Setup menu. The new diameters are used to qualify end-scans within the tolerance that is set in System Options (defaults to 1 mm). If either diameter is ZERO at measure time, then it will be reset to the current diameter value. This prevents a false rejection of good end-scan data.

Other Changes

Better math handling when the radius is set to zero. Much more efficient redraws in the view port Small user interface fixes and refinements The maximum number of LLP strings per measure allowed is increased in the Measure 2 tab of the Systems Options menu. The Measure a Tube control is changed to allow you to qualify the image on the screen before exiting the measure process. This adds a step to the measure process. Include End A Diameter and End B Diameter variables in Supravision file import and export. New help file and manual with updates and additional sections like "How to Scan a Straight."

Issues with this version fixed in next version

No known issues

Other Pages

• Back to VTube-LASER