Setup VTube-LASER for the Network License Manager

From ATTWiki
Revision as of 18:29, 12 May 2011 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Back to VTube-LASER

Use these steps to setup VTube-LASER for use with the Network License Manager software.


Vtube-laser screen 1 54.jpg




STEP 1

Start the NLM software on the server computer. (See Network License Manager for more information.)



STEP 2

  • Install the VTube-STEP software.
  • Run VTube-STEP.
  • In System Options, display the General Config tab.



Vtube-laser-generalconfig.jpg

  • Press the button in the upper left corner to edit the VTube-LASER configuration file.




(Note: Versions earlier than 1.64c require manual browsing and location of this file.)

Step 3

Find the [Hardware Key] section: 

[Hardware Key]
NLM IP Address=127.0.0.1
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser

Step 4

Change the address to the address of your server IP. (This entry is an example) 

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser


Step 5

Change the Enable Network value to 1. 

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=1
License Type=Laser


Step 6

Save and close the cfg file then run VTube.

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Setup_VTube-LASER_for_the_Network_License_Manager&oldid=16401"