CNC Bender v12-20111222

v12-20111222 Back to CNC Bender Software Updates

NEW - Servo-controlled PRESSURE DIE Motion

Servo-controlled pressure die positioning is much more accurate and the motion is smoother. This feature is especially useful for extreme accuracy during part capture. Parts can be accurately captured by the pressure die during PREBEND (Load), BENDING, and POSTBENDING (Unloading).

NEW - Options for PD Servo Motion

PreBend Options: PD Load Capture Position This feature allows you to move the pressure die to a position close to the bend die for load-capture.
Overall Options: PD Jog Position After Bends This feature allows you to open the pressure die slightly after a bend to relieve pressure before a mandrel pull.
Bending Options: PD Servo Retract Position This feature allows you to partially retract the pressure die during Multi-Bending and immediately after a bend.
PostBending Options: PD Unload Capture Position This feature allows you to partially retract the pressure die immediately after the last bend for unloading.

Other

A new Low Level PD Mode option allows the Pressure Die to be treated as a standard output actuator or a servo axis. Pressure Die COMDEFs were added: PD Servo Absolute PD Servo Incremental Positive PD Servo And Clamp Output And PDA Output Home PD Servo Absolute And PDA Output Home PD Servo Absolute And Clamp Output Home PD Servo Find Home PD Servo Reset Position PD Servo Absolute and PDA Servo Absolute PD Servo Absolute And PDA Output Home New help files were added: Option_PrebendSeamDetectDegreesPerSecond.rtf Option_PrebendSeamDetectFeedAbsoluteSpeed.rtf Option_PrebendSeamDetectFeedAbsolutePosition.rtf ExternalFileToRunWhenPartChangesInProcessor.rtf This help file was updated: Option_PrebendSeamDetectMode.rtf

Other Pages

• Back to CNC Bender
• Back to CNC Bender Software Updates
• See CNC Bender General Information
• See Teach Mode
• See Custom Commands