End-Scan Using End Targets

How to perform super high accuracy end-scans using an end target. Back to VTube-LASER

Why this technique is important

The quick End-Scan Using the Scissor Motion technique is not always precisely repeatable if you use any of the AUTO exposure settings to set the LASER exposure in real-time. The reason is that as he laser drops off the end of the tube, the automatic exposure feature impacts which of the points are kept where the tube drops off (at the end).

The solution to this issue is to use the End-Scan Using the End-Wall technique - which works well for tubes that have end-walls that are easy to aim at - AND end-walls that are not highly reflective with deformations like burrs.

For tubes that don't qualify for either of the above techniques, we recommend the ultimate technique of using end targets on the tube during measurement.

How the technique works

For high-precision end scans, a new end-scan technique is recommended using end targets. For example, for ends with highly reflective ends, a new technique includes using white targets on the end of the tubes.